Slotted model pin
Model pin with double guide pin for a variety of use against the exact location and shape of the stump.
Advantages
- An acknowledgment of the stump of the dentition and against the impact.
- One hole per stump is required.
- Shortens the model from production.
Technical Data
| Bi-Pin Long | Bi-Pin Short | |
|---|---|---|
|
Pin length |
17,5 mm (0.68") | 13,5 mm (0.53") |
| Head length | 5,5 mm (0.21") | 5,5 mm (0.21") |
| Ø Head | 2,0 mm (0.07") | 2,0 mm (0.07") |
|
Sleeve maximum |
3,6 mm (0.14") | 3,6 mm (0.14") |
Order Information
|
DESCRIPTION |
CODE |
|---|---|
| Bi-Pin, long, sloted, 100 pcs. | No. 346 1000 |
| Bi-Pin, long, sloted, 1.000 pcs. | No. 346 2000 |
| Bi-Pin, short, sloted, 100 pcs. | No. 326 1000 |
| Bi-Pin, short, sloted, 1.000 pcs | No. 326 2000 |
Slotted model pin with plunge pin
High glossy coated model pin with double trolley The pin used in the die transport process is shorter than the model.
Advantages
- No hole required.
- Two these guide pins as anti-rolling protection.
- Equal friction of all pins thanks to the special technique method.
Technical Data
| Bi-Pin Long | Bi-Pin Short | |
|---|---|---|
|
Pin length |
17,5 mm (0.68") | 13,5 mm (0.53") |
| Head length | 4,0 mm (0.15") | 4,0 mm (0.15") |
| Ø Head | 1,9 mm (0.07") | 1,9 mm (0.07") |
|
Sleeve maximum |
3,6 mm (0.14") | 3,6 mm (0.14") |
|
Length of plunge pin |
8,0 mm (0.31") | 8,0 mm (0.31") |
Order Information
|
DESCRIPTION |
CODE |
|---|---|
|
Bi-Pin long, with slot and plunge pin, 100 pcs. |
No. 343 1000 |
| Bi-Pin long, with slot and plunge pin, 1.000 pcs. | No. 343 2000 |
| Bi-Pin short,with slot and plunge pin, 100 pcs. | No. 323 1000 |
| Bi-Pin short, with slot and plunge pin, 1.000 pcs. | No. 323 2000 |
